0x88xx¶

0x8800 - Temperature¶

Type: s16

Name: temperature (1)

Temperature value is in (°C * 100)

JSON

[number] // Unit: Celsius

0x8801 - Pressure¶

Type: u32

Name: pressure (1)

Pressure value is in (hPa * 1000000)

JSON

[number] // Unit: hPa

0x8802 - Humidity¶

Type: u16

Name: humidity (1)

Humidity value is in (percentage * 10)

JSON

[number] // percentage

0x8803 - Light Intensity¶

Type: u16

Name: light-intensity (1)

Light intensity (illuminance) value in Lux.

0x8806 - Pressure Hysteresis¶

Type: u16

Name: pressure-hysteresis (4)

JSON

[number] // Unit: hPa

This value configures pressure hysteresis. Set to 0 to disable pressure hysteresis.

Max value: 4096

Pressure unit: hPa

0x8807 - TMP116 ID¶

Type: bytearray(8)

Name: tmp116-id (14)

Unique, factory-programmed 64-bit ID stored in TMP116 EEPROM that enables NIST traceability, ensuring the sensor meets high-accuracy standards verified against calibrated, ISO/IEC 17025 accredited equipment.

0x8808 - CO2¶

Type: u16

Name: co2 (14)

CO2 in ppm.

0x8809 - ToF Distance¶

Type: u16

Name: tof-distance (17)

Distance measured by ToF sensor in mm.

0x8810 - Motion¶

Type: u8

Name: motion (1)

Motion state with cause. A value other than 0 indicates motion.

Extensions are not used when motion is reported as timestamped data.

Extensions

JSON

{
  "transitionCounter": [number],
  "isTransition": [boolean]
}

The Transition Counter is incremented every time motion state changes from zero to non-zero and non-zero to zero. This counter can be used to detect missing motion events.

The Transition flag is set when motion is reported and there is a transition in motion state since last time it was reported.

0x8813 - Total Minutes In Motion¶

Type: u32

Name: total-minutes-in-motion (1)

Total minutes device remained in motion. It will increase till 0xFFFFFFFF and stay there.

0x8820 - Accelerometer Data¶

Name: accelerometer-data (1)

JSON

{
  "ax": [number],
  "ay": [number],
  "az": [number],
  "mg": [number]
}

0x8830 - Hall Effect¶

Type: u8

Name: hall-effect (1)

For devices that need to report hall effect state in real-time.

Extensions

JSON

{
  "previousStateTime": [number]
}

The previousStateTime is number of milliseconds Hall Effect was in previous state. This can be useful to very accurately measure how long it takes for the sensor to pass magnets.

0x8831 - Hall Effect Counter¶

Type: u32

Name: hall-effect-counter (1)

Total hall effect interrupt count. It will increase till 0xFFFFFFFF and return to 0 and again increase to 0xFFFFFFFF and repeat sequence.

0x8832 - RPM¶

Type: u16

Name: rpm (12)

RPM measurement.

0x8833 - Hall Effect 2¶

Name: hall-effect-2 (17)

For devices that need to report hall effect state in real-time. PST is the number of milliseconds Hall Effect was in the previous state. This can be useful to very accurately measure how long it takes for the sensor to pass magnets.

JSON

{
  "state": 1,
  "previousStateTime": 450
}

0x8840 - Mains Voltage¶

Type: u32

Name: mains-voltage (3)

Voltage value is in (V * 1000)

0x8841 - Mains Current¶

Type: s32

Name: mains-current (3)

Current value is in (A * 10000)

0x8842 - Mains Power¶

Type: s32

Name: mains-power (3)

Power value is in (W * 10000)

0x8850 - EnOcean Config (BETA)¶

Name: enocean-config (9)

JSON:

JSON Example (press/release):

{
  "mode": 1,
  "priority": 2
}

0x8858 - EnOcean PTM 215B Data (BETA)¶

Name: enocean-ptm-215b-data (9)

JSON:

JSON Example (press/release):

{
  "button": "B1",
  "action": "press",
  "seq": 12    
}

{
  "button": "B1",
  "action": "release",
  "seq": 13
}

0x8860 - Salto Config¶

Type: json-object

Name: salto-config (11)

This is used to set the Salto configuration. Set to NULL do disable.

Example configuration:

{
  "endpoint": "https://desktop-b838adn:8100",
  "apiKey": "mysecretkey123",
  "doorGpf": 1,
  "userGpf": 1
}

0x8861 - Salto Endpoint (BETA)¶

Type: UTF8

Name: salto-endpoint (11)

0x8862 - Salto Rssi Threshold (BETA)¶

Type: sbyte

Name: salto-rssi-threshold (11)

Default RSSI threshold used to trigger door opening.

0x8863 - Salto Office Mode Rssi Threshold (BETA)¶

Type: sbyte

Name: salto-office-mode-rssi-threshold (11)

Default RSSI threshold used to trigger office mode disabling.

0x8864 - Salto Office Mode Rssi Hysteresis (BETA)¶

Type: byte

Name: salto-office-mode-rssi-hysteresis (11)

Default RSSI hysteresis used to re-enable office mode.

0x8865 - Salto Sync¶

Type: void

Name: salto-sync (17)

Sync Salto door/user configuration with Salto Space.