KKM B1 0011-04

Description

3rd party hardware from KKM Smart Solutions. It has user replaceable CR2450 coin cell battery and will last up to 1.5 years on a single battery with default settings in unconnected mode. Programmed from factory with Meshtech firmware to work seamlessly and integrate fully in a Meshtech system. It has a push button for input and LED/sound indication to provide feedback.

The Bluetooth chipset is nRF52832 from Nordic Semiconductor.

  • Firmware Model Number: 0x0011 (17)

  • DFU Type: Nordic DFU (Secure)

  • DFU Advertisement Name: DFU_0011:{MAC Address +1}

Normal operation procedure

Similar to all Meshtech trackers the KKM B1 0011-04 is delivered in storage mode. This is to conserve power and avoid BLE advertising during transport. Normal operation device-mode for this device is unconnected. Pressing button for 1s will make device discoverable by advertising BLE storage mode advertisements, and device can be switched to unconnected mode by command via system/gateway. If no command to switch device mode is received while being in this state, device will go back to sleep and stop advertisements. To simplify provisioning to unconnected mode, pressing button for more than 5 seconds while in storage mode will automatically switch it to unconnected mode, and no command to switch mode is necessary from the system. When activating by long press, device will indicate that long press (5s+) has been received by lighting all LEDs.

In unconnected mode device will advertise tracking and status updates. Alarm is activated by pressing button until all LEDs blink 3 times. All LEDs will continue to blink periodically as long as alarm is active. Alarm state can be confirmed/cleared from system, and device will indicate with all LEDs longer to show that alarm has been cleared.

Supported Device Modes

  • Storage

  • Unconnected

  • DFU

Note

In DFU mode, the device MAC Address will increase with one. As an example, if MAC Address is AA:BB:CC:11:22:33, in DFU mode device will appear with MAC Address AA:BB:CC:11:22:34 and advertisement name “DFU_0011:AABBCC112234”. Another example if MAC Address is AA:BB:CC:11:22:3F, in DFU mode device will appear with MAC Address AA:BB:CC:11:22:40 and advertisement name “DFU_0011:AABBCC112240”

Properties

Property

Reported

Default Value

From Version

0x8000 - Model Number

Yes

0x0011 (17)

0x8001 - Firmware Version

Yes

-

0x8002 - Hardware Version

Yes

-

0x8003 - MAC Address

No

-

0x8007 - Variant

Yes

0x04

0x8020 - Power Source

Yes

0x02 (2)

0x8100 - Battery Level

Yes

-

0x8101 - Uptime

Yes

0x00000000

0x8110 - Device Mode

Yes

0x03 (storage)

0x8120 - Firmware Update State

Yes

0xFF (255)

0x8121 - Start Firmware Update

-

-

0x8122 - Firmware Update Control

-

-

0x8200 - Accelerometer Configuration

Yes

0xC340000A012005

0x8204 - Motion to Not In Motion Timeout

Yes

60 sec

0x8264 - Vibration Notification

Yes

0x01 (true)

0x8265 - Sound Notification

Yes

Always 0x00 (false)

0x8300 - Soft Reset

-

-

0x8301 - Factory Reset

-

-

0x8302 - Request Property Reporting

-

-

0x8810 - Motion

Yes

-

0x9800 - Alarm

Yes

0x00 (0)

0x9801 - Priority

Yes

0x00 (0)

0x9802 - TX Power

Yes

0x00 (tx power 0)

0x9803 - Long Button Press Timeout

Yes

0x02BC (700 ms)

0x9804 - Status and Tracking Interval in Normal Mode

Yes

0x00C80A (200ms, 10 Multiplier)

0x9805 - Status and Tracking Interval in SOS/Alarm Mode

Yes

0x00C802 (200ms, 2 Multiplier)

0x9806 - Status and Tracking Interval in Priority Mode

Yes

0x01F401 (500 ms, 1 Multiplier)

0x9807 - Status and Tracking Interval in Sleep Mode

Yes

0x0BB805 (3000 ms, 5 Multiplier)

0x9808 - Inactive to Sleep Delay

Yes

60 seconds

0x9810 - Whitelist Key

Yes

0x000000000000

0x9821 - Unread Text Message

Yes

Always 0x00 (0)

Events

Event

Version

0x8113 - Watchdog Reset Event

Current consumption

Average current consumption measurements done in some typical different device states. This is to illustrate that different advertisement intervals and SOS/Alarm active will impact battery lifetime significantly.

Device state

Average current consumption

Storage sleep

0.3µA

Storage advertising

720µA

Unconnected Normal Mode (default 98.04=0x03E801)

32µA

Unconnected Normal Mode (alternate 98.04=0x00C80A)

100µA

Unconnected SOS/Alarm Mode (98.05=0x00FA01)

430µA

Unconnected Priority Mode (98.06=0x01F401)

58µA

Licenses