MT PocketClip 231¶
Deprecated product
This product is deprecated.
For new deployments, consider one of the other alternatives.
Description¶
In the welfare industry, the MT PocketClip 231 is a practical product as it does not violate any sanitary requirements in hospitals or nursing homes. It has a push button for alarm signaling/response and vibrates whenever attention is needed. It is used as a tracker device normally operating in unconnected mode.
The Bluetooth chipset is nRF51822 from Nordic Semiconductor.
Firmware Model Number: 0x000F (15)
DFU Type: Nordic DFU
DFU Advertisement Name: DFU_WB_CR899:{MAC Address}
Note
This device does not support normal in-operation firmware update. It must be updated in DFU mode (Nordic DFU).
Supported Device Modes¶
Storage
Unconnected
DFU
Properties¶
Property |
Reported |
Default Value |
From Version |
|---|---|---|---|
Yes |
0x000F (15) |
||
Yes |
- |
||
Yes |
- |
||
No |
- |
||
Yes |
- |
||
Yes |
0x02 (2) |
||
Yes |
- |
||
Yes |
0x00000000 |
||
Yes |
0x04 (unconnected) |
||
Yes |
60 sec |
3.2.0 |
|
- |
- |
||
- |
- |
||
- |
- |
||
Yes |
- |
||
Yes |
0x00 (0) |
||
Yes |
0x00 (0) |
||
Yes |
0x04 (tx power +4) |
||
Yes |
0x02BC (700 ms) |
||
Yes |
0x00C80A (200ms, 10 Multiplier) |
||
Yes |
0x00C802 (200ms, 2 Multiplier) |
||
Yes |
0x01F401 (500 ms, 1 Multiplier) |
||
Yes |
0x0BB805 (3000 ms, 5 Multiplier) |
||
Yes |
60 seconds |
3.2.0 |
|
Yes |
0x000000000000 |
||
- |
- |
||
Yes |
0x00 (0) |
Events¶
Event |
Version |
|---|---|
3.3.0 |
Operating Modes¶
Normal
When in a normal mode, the priority and the alarm are set to “00”.
Alarm
When in Alarm mode, the Wristband gives light signals every 2 seconds. To switch the device to Alarm mode, the button has to be pressed for a while.
Priority
If prioritized, the messages from the device have a higher priority in the network queues. If not, the device reports less often.
Sleep
The device enters this mode after being still for approximately 2 minutes. The device in Sleep mode uses less current and generates less traffic in the network.